Product Showcase

  1. C.W. Brabender® ATR Plasti-Corder® Torque Rheometer (Advanced Torque Rheometer)
    12/22/2009
    The ATR Plasti-Corder® computerized torque rheometer provides flexibility for either mixing or extrusion applications.
  2. C.W. Brabender® Intelli-Torque Plasti-Corder® Torque Rheometer
    12/22/2009
    The Intelli-Torque Plasti-Corder® is a torque rheometer that utilizes the latest developments in CAN Field Bus Technology.
  3. C.W. Brabender® Visco-Corder® Model VC-E
    12/22/2009
    The New Visco-Corder® Model VC-E utilizes high precision torque cell technology to measure the viscosity of Newtonian and non-Newtonian materials.
  4. A15 EXPW Industrial Vacuum
    12/21/2009

    The A15 EXPW is an air-operated, intrinsically safe vacuum that meets the requirements for use is Class I, Group D, and Class II, Groups E*, F, and G.

  5. Brother® PocketJet® Mobile Printers
    12/11/2009
    Brother Mobile Solutions, Inc. is recognized for the PocketJet 3 and 3 Plus rugged mobile printers in route accounting applications and solutions in industries such as dairy and bakery. We are expanding our product offering outside mobile printing solutions into more traditional retail-supply chain desktop barcode label printing. Visit us at the National Retail Federation show in January 2010 to see our new products.
  6. 100 Gallon Sanitary Mixing Vessel
    3/30/2009
    Special 100 gallon capacity sanitary mix vessel constructed of type 316 stainless steel. This unit is mounted on a portable cart with a scale. Included is a tilt back air operated propeller agitator, vacuum design, a 100 psi jacket and a sanitary 180 grit finish.
  7. V-Blenders
    3/29/2009

    V-Blenders designs are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates.

  8. Skid Mounted Static Mixing Systems
    3/5/2009

    Charles Ross & Son Company, the leader in specialty mixing and dispersion equipment, is now offering complete skid mounted static mixing systems

  9. Double Cone Blenders
    2/25/2009

    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending.

  10. Double Cone Blender
    2/24/2009
    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending. Ross Double Cone Blenders are in stock in 5, 10 and 15 cu.ft. capacity. A full range of sizes from 1/2 to 80 cu. ft working capacity is available. Each is constructed of type 316-stainless steel and is internally polished to a 240 grit sanitary finish. The exterior is polished to an easily cleaned 150-grit finish. All Ross Double Cone Blenders are supplied with Intensifier bars to permit delumping and deagglomeration as needed. Discharge is accomplished through a manually operated Butterfly valve. The valve is positioned 24” from the floor when in the bottom position. All units are provided with appropriate safety railings and appropriately interlocked safety interlocks. Stop-Start and E-Stop Pushbuttons are included with all blenders.