News | June 23, 2010

Sanitary Mixer Offered For Paste Manufacturing

Ross_VMC300.jpg

Designed for multiple mixing requirements such as high-speed dispersion, emulsification and particle size reduction, the Ross VersaMix (Triple Shaft Mixer) is now available with a Solid/Liquid Injection Manifold or S.L.I.M.™ System. The incorporation of this high-speed powder induction technology adds to the VersaMix's flexibility and broadens its applicability while manufacturing viscous materials.

When introducing low-density solids, agglomerates can form when using top-entry slow speed mixers. In some cases, this lumping is irreversible – subsequent shearing will not eliminate the ‘fish eyes' that have formed, restricting plant operators to very slow addition of powders which hurts production throughput.

Our SLIM system injects materials directly into the rotor/stator agitator of the VersaMix. The strong vacuum force of the high shear mixer sucks in powders or liquids for immediate dispersion or emulsification. Wet-out is virtually instant and mixing time is significantly decreased. The volume of air-borne particles resulting from powder dusting is also minimized.

At the Ross Test and Development Center in Hauppauge New York, batches up to 100 gallons can be produced using this technology.

Ross Mixing, Blending, Drying and Dispersion equipment is manufactured on five continents and is marketed worldwide.

SOURCE: Charles Ross and Son Company